Thứ Bảy, 15 tháng 6, 2013
IPTV on VigorSwitch G2240
Simulation Scenario is as follows:
I. Multicast Server
Install VLC media player software into Multicast Server. In this example, I use VLC media player version 1.1.9.
To run VLC software by double click vlc.exe. Go to Media >> Streaming
At the dialog box Open Media, click button Add to choose video file (007_3M_Transport.mpeg or .mpg)
And click button Open.
Click button Stream to create multicast streaming for video file
At the dialog box Stream Output, Click Next
New destination: choose UDP (legacy)
Enable Display locally
And click button Add
Modify IP multicast and port for multicast streaming
In this example,
Address: 224.1.1.1
Port: 1234
Enable Activate transcoding,
Choose Video-H.264 + AAC (MP4) which is the type of video file that you want to create multicast streaming, in this example I choose MP4/MOV.
Click button Stream to play video file in Multicast Server
II. Switch Draytek G2240 Configuration
Created VLAN 1100 for Multicast Streaming, VLAN 2650 for PPPoE.
VLAN 1100: port 1, port 2, Enable IGMP Aware.
VLAN 2650: port 3, port 2.
Go to VLAN >> Ports to set role and PVID.
Port 1 is Access with PVID: 1100
Port 2 is Trunk
Port 3 is Access with PVID: 2650
Go to Multicast >> IGMP Mode, choose Snooping, click Apply
Go to Multicast >> Snooping, set port 2 is Fast Leave, port 1 is Router Ports
Go to Multicast >> IGMP Group Allow, specify range IP multicast and click button Add.
III. Vigor2920n configuration
IV. Wireless Client
Run VLC software version 1.1.9 by double click vlc.exe
Go to Media >> Open Network Stream
At Network Tab, type a network URL is udp://@224.1.1.1:1234, and click Play
Đăng ký:
Đăng Nhận xét (Atom)
Không có nhận xét nào:
Đăng nhận xét